E&I Inspector as per ISO 17020 and so on. Short term contracts (monthly/weekly base work order with prolongation). Factory Acceptance Test for LV MV switchgear, inductor motors + MCC, CCR up to 220 kV. Automated Fire Alarm & Fire Fighting System, HVAC control cabinets. SW&HW factory tests is to check its efficiency, compliance with the requirements of the legislation of the Russian Federation for automation systems of hazardous production facilities, compliance with the relevant normative and technical documentation of PJSC Gazprom, compliance with Contractor requirements (0055-0.0.0.00.000-PS.TT-0001), determining the application of AFA&FFS at the AmGPP. Duties as per ITP: Design Documentation review; Hardware testing: Marshalling cabinets, Operating cabinets hardware testing of all system I/O signals, ATS and so on; Functional testing, HMI testing, signal simulation. Cabinets packing and Shipment supervision.Expediting. Customers - Tecnimont Italy, Fluor Daniel, Sinopec etc. Manufacturers- Gazprom Avtomation PJSC, Honeywell, SST-Energomontazh, BENNING, ABB, EKRA, Power transformers facility ERSO Group etc.

Electrical & Instrument field engineer. Gas pipeline Land Fall Facility Russia - Turkey. International project. There was a temporary contract for Construction, Pre-Com, Com SAT activities on Site. Site representative of QA/QC department (reporting directly to Head of QA/QC dpt. English speaking UK). Duties: Supervising from the end-Customer side E&I equipment installation, Pre-Com, Commissioning activities, E&I Troubleshooting. MV, LV 10/0,4 kV metal-clad enclosure circuit breakers, gear control systems (Siemens), power transformers, power cables, Exd equipment, heat tracing, VSD panels, UPS systems, pipeline Cathodic protection, instrumentation (loop checks of field equipment MCB, PT, TT, gages) HVAC etc. Duet meeting with Contractors, design institute, Vendors. Review/acceptance and correction Design docs (power distribution, lighting, earthing & lightening system), Working documentation, Contractors Method Statement, Com Dossier reviewing, test reports checking, RFM preparation and review, As-Built documentation reviewing, accepting.

Electrical engineer, Utility. Rotation work 28/28. Report to Head of power of Chief Engineer Dpt. Yamal LNG plant, Sabetta, South Tambey gasfield. Duties: Provide maintenance of electrical equipment including power plant Siemens gas turbine generation 8 x 45 MVA, distribution switchboards, transformers Siemens 110/35/10, including SF6 insulated switch gears 110 kV), heat tracing, VSD panels etc. Temporary transferred to Commissioning team for electrical equipment Pre-Com Com supervising, Contractors Pre-Com, Com Dossier reviewing, test reports checking.

Project: Electrical method engineer TOTAL E&P Russie, Kharyaga oilfield. Nenec Region, Russia. Job description: Technical support electrical maintenance team, testing and commissioning the all electrical equipment 0,4-10kV at the Total E&P Kharyaga oilfield. Scheduling, organizing and provide preventive/corrective maintenance, repairing, put to operation electrical equipment such as: MCC 6 kV/0,4 kV metal-clad enclosure circuit breakers about 90 cells ABB, Siemens, MCCB Terasaki, relay protection systems such as MiCOM Alstom Grid, Sepam Scneider Electric, UPS 24/48 DC, 220 AC, power transformers 6/0,4 kV, Variable Speed Drivers Schlumberger, heat trace equipment, pipeline skin-effect heating. Prepare and establish technical scope of work for maintenance contract, assists in the tender process and implements contract follow-up, bidder list, technical SOW for service and target Contracts, method statement etc. Composing requirements for electrical equipment for procurement department and manufacturers. Investigation reports, malfunction reports creating. Troubleshoot complex or recurring electrical problems which require technical analysis and resolution with the help of other departments, vendors or original equipment manufacturer and recommend cost effective solutions Issue and review electrical verification schedules and associated 5 years maintenance planning, in accordance with ROSTEKHNADZOR and State requirements Assist the Head of Maintenance and the Electrical Maintenance team in the preparation of budgets, contracts, shutdowns, modifications, warranty claims, vendor mobilization and all other support functions necessary for the efficient operation. CMMS ”UNISAP R/3. Notification, Work Order, PR creating, checking materials on the stock, procedure preparation, changing Maintenance Items, Maintenance Plan, Annual Budget planning, Contractors payments control etc. Key skills: Reading an electrical diagrams LV/HV. Understanding how implemented gear control, relay protection systems middle-level complexity for equipment such as HV power transformers, HV overhead cables, HV cables, HV motors. Good user SAP SALSA – Maintenance Plan, Maintenance Item creation and Preventive Maintenance scheduling, Notification, Work Orders creation. Managemet and control warehouse stock material and spare parts safety-critical, min-max, consumble.

JSC Stroytransgaz Moscow. EPC contractor. Technical manager of electrical installation works and Commissioning. Fixed term employment contract Project: State power distribution Company FSK EES. The HV electric substations 750/500/220/110 kV. Design, equipment procurement, construction, commissioning. Coordinate a technical questions between Design institutes, Customer, Vendors, field operation contractors. Factory Acceptance Test in the Russia and abroad. Site Acceptance Tests. Provide technical review and confirmation for technical design and technical characteristics for: power transformer 750/500/220/110/10 kV, HV switch breakers and disconnectors Alstom, Siemens, voltage and current measurement transformers ARTECHE, dry insulated transformers SGB, ABB etc. Monitoring and scheduling of subcontractors works and equipment delivery time. Participation in the work/ onsite meetings. Supervising construction, installation and commissioning work at the power substations, clarification and elimination mistakes and discrepancies. Checking working documentation and test-report (conformity certification) of Contractors and manufacturers. Developing of internal guidance of quality control and compliance with State regulations IEC, PUE, PTEEP, RD 34.45.51.300-97, SP 76, I 1.13-07 etc. Checking Russian building forms КS-2, КS-3, КS-6, КS-6А. Checking an executive documentation.

Project: OJSC TNK-BP oil field. Short term contract. QC inspection, expediting + FAT. Kazakhstan, Ust-Kamenogorsk. 10kV metal-clad enclosure circuit breakers about 100 cells to the oilfield facilities of OJSC TNK-BP. Gear control unit Areva (Alstom Grid). MV switch gear SIEMENS. Quality control, commissioning in accordance with requirements of design documentation, Electrical Installation Code etc.

Projects: 1.Russian railway electrical substations 2.Oil corporation JSC TRANSNEFT Objectives: Modernization of fiscal and technical metering systems at the electrical substations. Wholesale Electricity Market traction substations RZD (Russian train systems). Technical measurement and remote operating electrical substation JSC "Transneft". Duty: Scheduling and monitoring works provided by contractors. Checking the quality of construction, installation, commissioning work at the substations. Participation in the planning, monitoring of works at the oil pumps stations. Checking working documentation, conformity certification and test reports after work is done, subcontracting organization. Development of internal guideline of quality control in accordance with State regulations PUE, PTEEP, RD 34.45.51.300-97, SP 76, I 1.13-07 etc. Checking and accepting a construction documents КS-2, КS-3, КS-6, КS-6А. Changes in patterns of contracts. Template forms preparation for test reports provided by subcontractors. Checking executive documents.

First two years lead engineer after had been chief specialist Oil pipeline pump station of JSC "Transneft" Diagnostic of electrical equipment oil pumps stations oil pipelines. Responsibilities, duty: Preparation and implementation a Scope of work, Method statements for the diagnostic works in accordance with State technical codes, State electrical equipment standarts, IEC, PUE, requirements of manufacturer documentation etc. Coordination and supervising works performed by subcontractor organizations about from 7 to 10 located in the different regions of Russia. Diagnostic equipment of power substation 110/35/10/6kV (current and voltage transformers, oil or dry insulated power transformers, MV metal-clad enclosure circuit breakers, relay protection). Complex diagnostics of step-down transformers, 6-10 kV electrical motors for oil pump of pipeline 1,25 MW – 8 MW. Preventive maintenance of relay protection systems. Vibrodiagnostics of pumping units in accordance with industry and federal documentation. Types of tests: Diagnostic by the partial discharges electrical method, thermal infrared control, High-voltage insulation testing with Hi-pot test AC and DC, Testing of current and voltage transformers (current-load current, the removal of current-voltage characteristics, measurement of ohmic resistance, the coefficient of transformation, testing high voltage) Realignment of relay protection and automatics (simple and medium level of complexity). Checking a technical report of examination of industrial safety for the diagnosis of boiler equipment including requiring registration in the Rostekhnadzor. Was member of the group charged for investigation accidents, tripping of electrical equipment. Electrical motors shaft breaking (flexible shafts, friction type bearings). Insulation failure of electrical equipment (power transformers, high voltage electrical motors). Investigating a nonselective trip of relay protection. Investigation report preparation for power equipment trip or failure. Was charged for technical audit of Contractors (Electrical laboratory, non-destructive test laboratory, certificates of non-destructive testing, vibration of rotation equipment, ultrasonic test etc). Electrical laboratories for compliance to the list of permitted test and measurements. Was in charge as a technical supervisor for Factory Acceptance Tests of equipment at the company ABB facilities. The ESPO (East Siberia - Pacific Ocean) project. Company JSC "Transneft": Finland, Vaasa, transformer plant. Sweden, Vasteras. Manufacturer of electric motors MNA. Italy, Vituone. Spain, Zaragoza. Had been involved to the performing and adjustment of FAT program. Was responsible for acceptance a results of non-rutine, rutine test. List of test: Measurement of dielectric loss tangent. Polarization index. High voltage test. Measuring of DC coil resistance. Measuring of insulation resistance and Hi-Pot test. Measuring of vibration. High speed characteristics deviation 50-60Hz. Measuring of no-load losses and short circuit of inductor motors / transformers. Measuring the deviation of the magnetic axes of stator and rotor motors. Temperature characteristics of "steel" and "copper". Checking phasing, color markings, checking manuals etc.

Repair and commissioning of relay protection a substation 110/35/6 kV Dutes: Maintenance and commissioning relay protection of substations 110/35/10/6 kV. There had been taken participation in a reconstruction of relay protection, geer control of substations 35 /10/6 kV. There were installed mostly electromechanical relays and gear control systems.

Objects: The all of welding equipment at the aviation manufacturing plant. Welding machines DC and AC types, working in shielding gases (argon-arc welding of non-consumable electrode). Friction welding machines. Machines spot and resistance welding. Machines seam welding. Job description: Repair and maintenance of thyristor control systems of machines suture, contact point welding, maintenance of relay protection of substation 35 / 6 kV. Adjustment and maintenance of systems and controls thyristor converters, control unit of welder machine. Replacement of the control units. Selection and replacement of power semiconductor elements. Selection of welding conditions together with technology engineer. Realignment of operating modes. Rate of growth / decline value of the current / pressure selection stages of the welding transformers. There were invented and implemented into operation 3 innovation proposals (in the electrical welding automation area) it have been confirmed by official Certificate.

Automated Technology Systems, Manufacturing Engineering

RosTechNadzor, Certificated for V group of electrical safety. Electric substation, electrical equipment.

Educational centre “TechnoProgress”, Moscow., Certificate of public officer “Rostechnadzor”

St. Petersburg energy institute of further training, Selecttion, calculation and maintenance of relay protect systems voltage range 0,4-110 kV

Educational centre “Energya”, Moscow, high pressure water vessels and pipelines 3-4 category

Industrial training at the military aviation plant., There have passed qualification test electrical repair and maintenance electrical machinery – VI (highest) category.